How bridges balance forces

Compression and tension forces on six different types of bridges: beam, arch, suspension, cable-stayed, truss, and cantilever

Forces make things move, but they also hold them still. It's far from obvious, but when something like a skyscraper looms high above us or a bridge stretches out beneath our feet, hidden forces are hard at work: a bridge goes nowhere because all the forces acting on it are perfectly in balance. Bridge designers, in short, are force balancers.

The biggest and most pervasive force in the universe, gravity, is constantly tugging things down, which isn't such a problem for a skyscraper, because the ground underneath pushes straight back up again. But a bridge spanning a river, valley, sea, or road is quite different: the huge deck (the main horizontal platform of a bridge) has no support directly beneath it. The longer the bridge, the more it weighs, the more it carries, and the bigger the risk it'll collapse. Bridges certainly do fall down from time to time, and quite spectacularly, but most stand happily still for years, decades, or even centuries. They do it by carefully balancing two main kinds of forces called compression (a pushing or squeezing force, acting inward) and tension (a pulling or stretching force, acting outward), channeling the load (the total weight of the bridge and the things it carries) onto abutments (the supports at either side) and piers (one or more supports in the middle). Although there are many kinds of bridges, virtually all of them work by balancing compressive forces in some places with tensile forces elsewhere, so there's no overall force to cause motion and do damage.

  

Carrying loads

If a bridge is unloaded, all it really has to do is support its own weight (the dead load), so the tension and compression in its structure are essentially static forces (ones that don't cause movement), changing little from hour to hour or day to day. However, by definition bridges have to carry changing amounts of weight (the live load) from things like railroad trains, cars, or people, which can increase the ordinary tensile or compressive forces quite dramatically. Rail bridges, for example, bend and flex every time a heavy train crosses over them and then "relax" again as soon as the load has passed by.


Original article link: https://www.explainthatstuff.com/bridges.html




Yorumlar

Yorum Gönder

Bu blogdaki popüler yayınlar

Resim
The Elements Of Bridge Design Basic forms There are six basic bridge forms: the beam, the  truss , the arch, the suspension, the  cantilever , and the cable-stay.   Beam The  beam bridge  is the most common bridge form. A  beam  carries vertical loads by bending. As the beam bridge bends, it undergoes horizontal compression on the top. At the same time, the bottom of the beam is subjected to horizontal  tension . The supports carry the loads from the beam by  compression  vertically to the  foundations . A beam bridge, with forces of tension represented by red lines and forces of compression by green lines. Encyclopædia Britannica, Inc. When a bridge is made up of beams spanning between only two supports, it is called a  simply supported beam bridge. If two or more beams are joined rigidly together over supports, the bridge becomes  continuous. Truss A single-span  truss  bridge is like a simply supported beam be...
Devamı
Resim
Bending Basics: The hows and whys of springback and springforward To a press brake operator, a  bending angle  is different from a  bent angle , and it all has to do with that ever-present forming variable: springback. Springback occurs when the material angularly tries to return to its original shape after being bent. When fabricating on the press brake, an operator will overbend to the bending angle, which is angularly past the required bent angle, compensating for the springback. Overbending to the bending angle allows the desired bent angle to be attained when the part is released from pressure. The tensile strength and thickness of the material, type of tooling, and the type of bending all greatly influence springback. Efficiently predicting and accounting for springback are critical, especially when working with profound-radius bends, as well as thick and high-strength material. The Science of Springback Why exactly does springback occur? There are two reasons. The ...
Devamı